It looks like you are visiting us from . Would you like to be taken to our UK website?
Neousys Rugged Intel Ivy Bridge Compact In-Vehicle Computer
- Up to Intel Core i7
- 2 COM, Isolated DIO, Hot-Swap bay
- 4 25.5 W PoE+ ports
€1,799.21 €1,446.95 €1,750.81
EASILY POWER YOUR MOBILE APPLICATION
Designed with high-performance mobile applications in mind, the Nuvo-3100VTC is compact enough to be installed just about anywhere, while packing impressive Intel Ivy Bridge Celeron or Core processing power into a rugged, fanless chassis. Paired with the Intel QM77 chipset, this versatile system is ideal for fleet management and automatic vehicle location (AVL) applications.
RUGGED PROTECTION FOR MOBILE COMPUTING
In a fanless, ventless enclosure that protects against dirt and other debris, the Nuvo-3100VTC is protected from the risks of clogged fans or shorted components to ensure longer life of the hardware. The whole system is hardened against shock and vibration, and is rated for operation in temperatures as low as -25°C and as high as 70°C. The Nuvo-3100VTC's automotive power supply can interface with a vehicle's battery to protect the system and ensure ignition sensing and gentle shutdowns, extending the life of the system and protecting the vehicle battery from draining. The system is also E-Mark certified for in-vehicle applications.
CONNECTIVITY WHERE YOU NEED IT
The Nuvo-3100VTC provides a fully-featured, versatile platform, perfect for mobile surveillance applications. Connectivity options include 4 PoE 802.3at ports to power IP or PTZ cameras at up to 25.5 W per port, as well as DVI-I, 6 USB (including 4 USB 3.0), 2 RS-232 ports, and isolated DIO. With two PCIe Mini-Card slots, one of which is paired with a SIM card slot for use with cellular modems in asset tracking or AVL applications, the Nuvo-3100VTC is purpose-built to go anywhere. With an mSATA slot and mounting for two 2.5" hard drives or SSDs (including a hot-swap bay), the Nuvo-3100VTC is perfect for in-vehicle or remote data-logging.
- i7-3610QE (Max performance): -25°C ~ 50°C
- i7-3610QE (Reduced Performance):-25°C ~ 60°C
- i7-3610QE (Extended Performance): -25°C ~ 70°C
- i5-3610ME (Max performance): -25°C ~ 50°C
- i5-3610ME (Reduced Performance):-25°C ~ 70°C
- i5-3610ME (Extended Performance): -25°C ~ 70°C
- Celeron 1020E: -25°C ~ 70°C
|Hardware Line||Rugged Line|
|Processor Socket||G2 (rPGA988B)|
|Processor Generation||Ivy Bridge|
|Graphics/GPU||Intel HD Graphics 4000|
|Memory Type||DDR3 SO-DIMM (non-ECC)|
|Memory Capacity||8 GB|
|Memory Speed||1600 MHz|
|Memory Slot Count||1.00|
|Rear I/O||1 8~35 v 3-pin Terminal block power connector
1 Automotive timing setting switch
3 Antenna jacks
2 DisplayPort ports
2 USB 2.0
4 25.5 W PoE ports
1 8-bit isolated DIO port (4 in / 4 out)
|Front I/O||Power Button
4 USB 3.0 ports
2 Audio jacks; line-out, mic
1 DVI-I port
2 RS-232/422/485 COM ports
1 Locking 2.5" Hot swap hard drive bay
|Expansion Options||1 PCIe Mini Card slot (full height with USIM)
1 PCIe Mini Card (half-height)
|Storage Options||2.5" HDD/SSD
2.5" Hot-swap HDD/SSD
|LAN Controller||Intel 82579LM PCIe GbE
Intel I210 GbE
|System Monitoring||AMT Support|
|Input Voltage||8~35 V|
|Power Input||3-pin Terminal Block connector|
|Power Features||Wide Input
Peripheral Power Out
|Operating Temperature Range||-25 ~ 70°C|
|Shock Tolerance (Operating)||Operating, 50 Grms, Half-sine 11 ms Duration (w/ SSD, according to IEC60068-2-27)|
|Vibration Tolerance (Operating)||Operating, 5 Grms, 5-500 Hz, 3 Axes (w/ SSD, according to IEC60068-2-64)|
|Dimensions (WxHxD)||210 x 62 x 165 mm
8.27" x 2.5" x 6.5"
|Port Punchouts||3 Antenna holes|
|Manufacturer Launch Date||Q4'12|
|Expected Life Cycle||5 Years|
|Regulatory Information||2011/65/EU (RoHS 2 Directive)
FCC 47 CFR Part 15
|Warranty||2 year limited warranty on parts and services|
|Notes||The system's operating temperature range is dependent on the operating temperature ranges of the individual components. For a fully wide-temperature solution, please select the wide-temperature component options from the dropdowns above.
Please be aware, if configured with the automotive ignition sensing function, this unit will not power on with default AC adapter wiring. Please refer to the manufacturer's official documentation.
If you are looking to put your own drives with a height of 7mm in the hot swap bays we recommend the adhesive spacer be added to the drive due to fitment issues.