Fanless Edge Device for Lightweight Computing

SKU
CL200G-11
This affordable prototype-friendly gateway is ready for the edge with its reliable fanless design, compact form factor, and accessible x86 architecture.
  • Intel Celeron N3350 processor
  • 1 LAN, 1 mini-DisplayPort, 1 COM
  • TPM via Intel Platform Trust Technology
Coming Soon
The maximum allowed quantity for this selection is 1. Your quantity has been adjusted.

Thanks!

We will notify you when this product becomes available.

Heads up

You already signed up for availability notifications for this product.

Call for Pricing

02037 697 073

 
Configure & Buy
Customize Fanless Edge Device for Lightweight Computing
Ultra Point Apollo Lake Pico-ITX Computer with N3350, Single LAN, 1 GB RAM, No Onboard Storage
- +
Atheros Dual Band Wi-Fi and Bluetooth 4.0/HS PCIe Mini Card (DHXA-222)

Atheros Dual Band Wi-Fi and Bluetooth 4.0/HS PCIe Mini Card (DHXA-222)

  • Bluetooth supports high speed and low energy operation
  • 300 Mbps dual band Atheros 2-stream Wi-Fi
  • PCIe Mini-Card; Half-Height
- +
Dual-Band Wireless 6.3

Dual-Band Wireless 6.3" Terminal PIFA Antenna

- +
Innodisk 3ME4 mSATA SSD - 32 GB - [0WHR]

Innodisk 3ME4 mSATA SSD - 32 GB - [0WHR]

  • 32 GB storage
  • SATA 6.0 Gb/sec
  • Full-size mSATA form factor
Open Product in a New Tab
Innodisk 3ME4 mSATA SSD - 64 GB - [0WHS]

Innodisk 3ME4 mSATA SSD - 64 GB - [0WHS]

  • 64 GB storage
  • SATA 6.0 Gb/sec
  • Full-size mSATA form factor
Open Product in a New Tab
Innodisk 3ME4 mSATA SSD - 128 GB - [0WHT]

Innodisk 3ME4 mSATA SSD - 128 GB - [0WHT]

  • 128 GB storage
  • SATA 6.0 Gb/sec
  • Read/Write speeds of 530/190MB/s
Open Product in a New Tab
Innodisk 3ME4 mSATA SSD - 256 GB - [0WHU]

Innodisk 3ME4 mSATA SSD - 256 GB - [0WHU]

  • 256 GB storage
  • SATA 6.0 Gb/sec
  • Full-size mSATA form factor
Open Product in a New Tab
Innodisk 3MG2-P mSATA - 512GB - [0WJL]

Innodisk 3MG2-P mSATA - 512GB - [0WJL]

  • 512 GB storage
  • SATA 6.0 Gb/sec
  • 0°C ~ +70°C operating temperature
Open Product in a New Tab
Transcend 370 mSATA SSD - 1 TB - [WP]

Transcend 370 mSATA SSD - 1 TB - [WP]

  • 1 TB storage
  • mSATA form factor
  • SATA III 6Gbps
- +
Serial Cable 200mm, DB9 to 2.54mm IDC, AT/Everex

Serial Cable 200mm, DB9 to 2.54mm IDC, AT/Everex

- +
CEC Controller for Logic Supply Systems

CEC Controller for Logic Supply Systems

- +
Set System to Auto Power On via BIOS

Set System to Auto Power On via BIOS

- +
Mounting bracket for CL200 and CL210 systems (Wall, VESA100 VESA75)

Mounting bracket for CL200 and CL210 systems (Wall, VESA100 VESA75)

DIN clip for CL200 and CL210 Systems

DIN clip for CL200 and CL210 Systems

- +
Ubuntu Server 16.04 LTS 64-bit

Ubuntu Server 16.04 LTS 64-bit

Ubuntu Server 18.04 LTS 64-bit

Ubuntu Server 18.04 LTS 64-bit

- +
Standard Build (3-5 business days)

Standard Build (3-5 business days)

  • 3-5 business days if ordered before 11am Eastern
  • Heavy production periods may extend build times
  • Systems subjected to rigorous thermal & functional testing
Expedited Build (1-2 business days) - Integrated CPU

Expedited Build (1-2 business days) - Integrated CPU

  • 1-2 business days if ordered before 11am Eastern
  • Heavy production periods may extend build times
  • Systems subjected to rigorous thermal & functional testing
- +
2 Year Standard Warranty

2 Year Standard Warranty

  • Protection from Defects
  • Phone Support by Experienced Technicians
  • A Simple, No-hassle RMA Process
Open Product in a New Tab
3 Year Extended Warranty - Advanced Onboard

3 Year Extended Warranty - Advanced Onboard

  • Protection from Defects
  • Phone Support by Experienced Technicians
  • A Simple, No-hassle RMA Process
Open Product in a New Tab
- +

* Required Fields

Fanless Edge Device for Lightweight Computing
Fanless Edge Device for Lightweight Computing

Coming Soon

Prototype This System Risk Free For 30 Days
 
Overview
 
CL200G-11 Ultra Small Form Factor Computer

ECONOMICAL AND RELIABLE

The CL200G-11 is an ultra small form factor fanless gateway designed for the IoT Edge.Based on the stable Linux platform, the system is equipped with the efficient Intel Celeron N3350 processor and 1GB of LPDDR4 memory that can easily connect your devices and sensors to the cloud. The CL200 also features Intel Platform Trust Technology (PTT), a firmware alternative to TPM that meets TPM 2.0 standards to keep your system secure.

 

SET IT AND FORGET IT

The CL200G-11’s industrial-grade Hardshell Fanless Technology sets it apart from other drop in gateway solutions, but also protects the system from dust, debris, chemical, and moisture ingress. Its unique cast aluminum chassis efficiently dissipates heat while allowing for space-saving mounting options such as VESA, wall, and DIN rail mounting.

CL200G-11 Ultra Small Form Factor Computer
 
CL200G-11 Ultra Small Form Factor Computer

EASY TO CONNECT

Every side of the system is utilized for I/O. The front and bottom include two USB 3.0 ports, one Gb LAN port, one mini-DisplayPort, one USB 2.0 port, and a 9 pin RS-232 box connector COM port. Despite its diminutive size, the CL200G-11 has the level of expansion found on larger boards with two mPCIe slots (one full-height, one half-height) for Wi-Fi and mPCIe expansion cards. An mSATA slot (shared with the full-height mPCIe) or microSD card slot on the back gives you additional options when it comes to storage.

 

Bronze Award Winner For Product Innovation - IMTS 2018

"The CL200 is essentially an industrial grade single-board computer (SBC). SBCs like BeagleBones and Raspberry Pis are commonly used for sensor implementation and for the optimization of data collection on industrial equipment, whether it's for academic purposes or to aid a factory in attempt to achieve World Class OEE. SBCs are often physically fragile and lacking in computational capability. Logic Supply solves this issue by offering a more powerful SBC with substantial memory and protective enclosure with multiple mounting and placement options."    ~IMTS Awards Committee

IMTS Bronze Award 2018

Windows Compatibility: Please note, the Intel Apollo Lake generation of processors no longer support legacy Windows operating systems, including Windows 7. Contact us for more information.

DOWNLOADS

Custom branded computers

Product Customization

Logic+ Services: Branding and engineering for volume projects

 
Learn More 
Cormac Account Management

Personalized Attention

Logic+ Services: End-to-end support for larger customers

 
Learn More 
 
Technical Specs
More Information
SKU CL200G-11
Hardware Line Industrial Line
System Cooling Fanless
Processor Intel Celeron N3350
Processor Speed 1.1 GHz
Max Burst Frequency (GHz) 2.4
Processor Socket Onboard (BGA)
Processor Generation Apollo Lake
Processor Cores 2
Chipset Shared with CPU
Graphics/GPU Intel HD Graphics 500
Memory Type LPDDR4
Memory Capacity 1 GB
Memory Speed 2133 MHz
Memory Slot Count 1.78
Rear I/O 1 MicroSD Card slot
1 Power Button
1 Power Indicator LED
1 COM port (RS-232)
1 USB 2.0 port
1 DC input jack (12 V)
Front I/O 2 USB 3.0 ports
1 mini-DisplayPorts
1 Gb LAN ports
Expansion Options 1 PCIe Mini Card slot (full height, shared mSATA)
1 PCIe Mini Card (half-height)
Storage Options MicroSD Card
mSATA (shared PCIe Mini Card slot)
LAN Controller Realtek RTL8111G
Included Power Supply Power Adapter AC/DC 12 V, 36 W - with Interchangeable Plug
System Monitoring PTT in BIOS
Watchdog Timer
Input Voltage 12 V
Power Input DC jack
Operating Temperature Range 0 ~ 40°C
Dimensions (WxHxD) 34 mm x 115 mm x 82 mm
1.34" x 4.53" x 3.23"
Case Type Compact
Customizable
Fanless
Case Material Cast Aluminum
Steel
Port Punchouts 4 Antenna holes
Mounting Options DIN-mount
VESA-mount
Wall-mount
Regulatory Information 2002/96/EC (WEEE Directive)
2011/65/EU (RoHS 2 Directive)
Additional Safety and EMC certifications pending
CB scheme
CE
EN 55024
EN 55032
EN 62368-1
FCC 47 CFR Part 15
IEC 62368-1
IP50
UL Listed
Warranty 2 year limited warranty on parts and services

Sender

Recipient

Success You have successfully shared this product

We can't process your request right now.

We try to respond within the same business day.

If you need immediate pricing, call 02037 697 073.

Thank You For Your Request

Your request has been received by our Sales Team who will review the details and provide you with a quote.

If your project is time sensitive, please give us a call at 02037 697 073.

We can't process your request right now.