Embux ICM-3011 3.5" NXP i.MX6 ARM Motherboard

3.5" motherboard featuring ARM NXP i.MX6 DualLite processing, offering a versatile solution with a small footprint. Pre-loaded with Android 5.0.2 (Lollipop).
  • NXP i.MX6 Cortex-A9 Processor
  • 2 USB, Gb LAN, HDMI
  • 2 GB of on-board DDR3 RAM
The maximum allowed quantity for this selection is 1. Your quantity has been adjusted.

Call for More Information

+1 802 861 2300

Configure & Buy
Customize Embux ICM-3011 3.5" NXP i.MX6 ARM Motherboard
Embux ICM-3011 3.5" NXP i.MX6 Motherboard
- +
Power Adapter DC 12 V, 36 W - with Interchangeable Plug

Power Adapter DC 12 V, 36 W - with Interchangeable Plug

  • Includes North America, EU, UK, Australia plugs
  • IEC Level VI
Open Product in a New Tab
- +
- +

* Required Fields


The ICM-3011 from Embux is a low profile, 3.5” motherboard that features next generation ARM processing and a versatile array of industrial I/O.



Driven by the NXP i.MX6 Cortex-A9 processor, the ICM-3011 takes advantage of improved graphics processing and performance to offer a 25% increase in performance per core than its predecessor. With 2GB of DDR3 memory and a robust suite of onboard connectors, the ICM-3011 is a scalable, highly power-efficient platform ideal for a broad range of networking, enterprise and mobile solutions.



Despite its compact form factor, the ICM-3011 offers a rich array of I/O including 4 USB 2.0 ports (2 internal), a 1920 x 1080 capable HDMI port, one LAN port, one standard SD and one SDIO slot, 2 18/24-bit LVDS outputs, 4GB eMMC NAND and 8MB NOR flash. The addition of CAN bus, GPIO, and a wide input voltage of 10.8~26.4 volts make the ICM-3011 a highly versatile option for a range of industrial automation needs. With support for a range of operating systems, including both Android and Yocto Linux, the ICM-3011 can be easily customized to suit your individual application.



The ICM-3011 has been engineered to meet the needs of more demanding industrial environments with a jumper-less and all solid capacitor design. Consuming only 3.5 W of power, the ICM-3011 board offers power efficiency and performance optimization without limiting its versatility. Boasting an operating temperature range of -20 to 70 degrees C and offering expansion with a SIM card socket and dual full/half size mini PCIe slots, the ICM-3011 is ideal for users searching for a highly versatile ARM computing solution.

Built and tested Industrial Computers

Upgrade To A Full System

Custom built to your specs and fully tested

Try The System Finder 
Cormac Account Management

Personalized Attention

Logic+ Services: End-to-end support for large customers

Learn More 
Technical Specs
More Information
Manufacturer Launch Date Q2'15
Expected Life Cycle 5 Years
Processor NXP i.MX 6 DualLite
Processor Speed 1.0 GHz
Processor Generation Cortex-A9
Processor Cores 2
Display Resolution 1920 x 1080 (HD 1080)
Memory Speed 800 MHz
Memory Type DDR3 Onboard
Memory Capacity 2 GB
Expansion Options 2 PCIe Mini Card slots (full or half height)
1 SIM Card socket
Front I/O 1 DC jack
2 USB 2.0 port
1 Gb LAN port
1 RS-485 COM port (3.5mm terminal block)
1 HDMI port
1 Reset button
2 Audio jacks; line-out, mic-in
Rear I/O 1 Micro USB (device mode only)
Onboard Connectors 2 USB 2.0 headers
4 RS-232 port (8-wire)
2 RS-232 port (4-wire)
1 RS-485 port (miscellaneous header)
2 CAN bus (miscellaneous header)
8 GPIO header
1 Line-in header
1 Power input connector
2 Speaker out connectors
1 I2C connector
1 SPI pin header
1 10-bit DIP switch
1 Front panel connector
2 LVDS connectors (18/24-bit)
System Monitoring Watchdog Timer
Operating Temperature Range -20 ~ 70°C
Operating Humidity 5% ~ 95%
Power Input DC jack
Input Voltage 10.8 ~ 26.4 VDC
Power Features Wide Input
Dimensions (WxHxD) 146 x 16.16 x 72mm
5.75" x 0.63" x 2.83"



Success You have successfully shared this product

We can't process your request right now.

We try to respond within the same business day.

If you need immediate pricing, call +1 802 861 2300.

Thank You For Your Request

Your request has been received by our Sales Team who will review the details and provide you with a quote.

If your project is time sensitive, please give us a call at +1 802 861 2300.

We can't process your request right now.