Intelligent 100 W DC-DC Converter with USB Interface

Intelligent DC-DC Converter with USB Interface

High power micro-controller DC-DC converter that accepts any input ranging from 6 to 34 volts and then provides varying outputs, depending on application. Can act as an Intelligent Automotive PSU for mainboards that have onboard power.


    56,00 € 67,76 € incl. TVA
    Usually Ships in 3~4 Weeks


    The DCDC-USB is a high power buck-boost micro-controller DC-DC converter. It accepts any input ranging from 6–34 volts and the output can either be 12-volt regulated or changed with simple jumper settings to 5, 6, 9, 12, 13.5, 18 or 24 volts or via USB in fine increments (0.25 volts) anywhere from 5 to 24 volts. The DCDC-USB is excellent for powering a mainboard with single rail power from any voltage to any voltage and is great for use with laptops and custom electronics.

    Four modes of operation:

    • Dumb mode: Acts as a regular buck-boost DC-DC converter with wide input (6–34 volts) and produces a fixed 12-volt output (or any output from 5–24 volts)
    • Automotive mode: Acts as an intelligent power supply, ignition aware, and will send ON/OFF pulse to the mainboard to shut the system down or turn it on. Power consumption is less than 1 mA.
    • UPS mode: Acts as an intelligent UPS unit; it will shut down at prescribed battery voltages.
    • Script mode: Can be programmed to wake up, sleep-based on pre-programmed scripts.

    12 V output max current chart:

    12 V output max current chart


    Technical Specs

    Power Output 100 W
    Input Voltage 6~34 V
    Power Features Wide Input
    Automotive Intelligence
    Peripheral Power Out
    Operating Temperature Range -20 ~ 65°C
    Dimensions (WxHxD) 135 x 37mm
    • At output power greater than 40 watts or if unit temperature exceeds 65°C, forced air ventilation will be required in order to prevent unit from excessive thermal stress for long period of times.