WATT You Should Know About Processor Power - I/O Hub

WATT You Should Know About Processor Power

WATT You Should Know About Processor Power

WATT You Should Know About Processor Power

Define: watt
wät/
noun: watt; plural noun: watts; symbol: W
the SI unit of power, equivalent to one joule per second, corresponding to the power in an electric circuit in which the potential difference is one volt and the current one ampere.

The world of processors is a lot like the world of cars. People yell for more POWER and buy the latest and greatest without thinking. More speed! More horsepower! Damn the cost! With cars that often ends up with you holding a big bill or stuck in a ditch when you end up with to much car. With processors it’s much the same: you can end up with more “power” then you need, a processor that costs an arm and a leg, and buyers regret.

In particular, when you are talking about processors with high performance and impressive stats, there is a key number you want to watch out for, especially in industrial and embedded applications: the watts. Whats watts got to do with it? You’ve seen the stat in the system — 35W, 65W, 90W, etc. Here’s what you need to know.

Power vs Power
First off, we need to understand that power is used in two senses in the computer world. Power is often talked about as the overall processing power eg the Ghz. But as important is power consumption. That second meaning is expressed in watts.

More watts is not better or worse — its just the amount of power it takes to run the processor at full capacity. However, the higher the number, the more your electricity bill is ticking up and the more heat is being generated. Processors that perform tasks at a greater speed inherently require more power, but more and more are optimizing their energy efficiency. To return to the car analogy, it’s engines that perform as well, on less gas.

nf99-525-dual-core-atom-fanless-mini-itx-motherboard_bigEfficiency and Reliability are Kings of the Industrial and Manufacturing Hill
While a processing power arms race is happening in the consumer space, in industrial and manufacturing industries there is a focus on reliability and efficiency. An industrial control system for a 10 year old million dollar machine that runs on a line doesn’t need the processing power to render the latest first person shooter. Instead, it needs just enough juice to run the line of control software all day long, every day without fail, at the lowest cost possible. Anything more is a waste, anything less is a disaster.

In terms of Return on Investment (ROI), low power consumption processors on industrial motherboards reduce downtime and increase lifecycle. Why? Because Hondas run longer than Hummers.

Low watts are also the difference between money in the bank, and bills to the power company. How much? Lets take a look.

Green is the New Black
Simply saying money can be saved or that there is money you might be wasting is not enough, let’s crunch some numbers. I have selected three processors, each with vastly different power ratings. The equation to calculate the power consumption is (A/1000)*B*24*365 where A is the watts and B is the cost of power. In the United States the average Kilowatt hour cost of about 10¢ (EIA). Though it varies by region, I’ll be using that as my basis. Let’s see how it works out.

1 – 65 W
Equation: (65/1000)*.10*24*365
65W is pushing the outside envelope of what might be considered “Industrial” however it is by no means the upper limits. 90W is not uncommon in consumer boards. With it’s 65W pull, this is the biggest of this group. At .065 Kilowatts per hour (kWh), it comes to about 16¢ per day and over the course of a year, thats $58.
2 – 35W
Equation: (35/1000)*.10*24*365
The 35W is closer to an “Average” industrial power pull. At .035 kWh. We are looking at about 8¢ per day and $30 per year.
3 – 14W
Equation: (14/1000)*.10*24*365
This last one is a a very low power one using only 14W. Thats .014 kWh close to 3¢ per day and a yearly cost of about $12.

That is maximum utilization, 24 hours a day, 7 days a week, 365 days a year. Not uncommon usage on a manufacturing floor running triple shifts, a digital kiosk that runs night and day, a remote data collection station monitoring seismic activity and the like. Some industrial uses can probably lower those numbers based on their usage, but since we are focused on heavy industrial and manufacturing use, we are gonna go with maximum utilization,

By that reckoning, if you are running 50 systems with 65W processors, assuming a lifecycle of 5 years, that’s $14,500. 50 of the 14W over the same time comes to $3000. That is $11,500 that’s being wasted, pure and simple.

Fan On Heatsink

Less heat is much cooler
There is a fairly complicated equation that derives the exact amount of heat that is produced by processors (Learn more), but the short version is watts produce heat. This means that some sort of cooling needs to take place so the board doesn’t melt, and the more that needs to be done to remove heat, the more complex it is going to get.

Processors are often cooled with heat sinks. They are pieces of heat conductive materials like aluminum and copper, shaped to maximize the surface area, diffuse the heat over more space and dissipate it into the surrounding area. This is why many fanless systems have fins or ribs, as the cases themselves are massive heatsinks.

However, the more powerful the processor, the harder it is for passive methods to keep up. At a certain point a fanless case will no longer suffice and one that supports a fan must be used to keep it cool. While they add a fractional amount to power to the consumption equation, even a large fan is adding only about 2w (or $1.75 a year), the bigger concern is the effect on system reliability.

We’ve talked about how the fan is the Achilles Heel of the PC , and it is never more true than here. If you have a fan, you have a point of failure. If you have a fan, you need somewhere for the air to go, which requires vents that can open your system to environmental concerns such as dust and debris. If you have a fan, you need to build the case that much bigger to make room for the fan and the larger power supply.

But if you have a low power processor you no longer need a fan. Problem solved.

Takeaway
In the long run picking the right processor can save you money by eliminating wasteful power consumption. Finding the right speed, price, and lifecycle are all factoring into your decision, but be sure to keep watts in mind as well. Contact one of our engineers to answer any questions you might have, and learn more about low power consumption options available for you.

Find Your Computer Here

Leave a Comment

Your email address will not be published.