Why All The Fuss About CAN Bus?

Why All The Fuss About CAN Bus?

Why All The Fuss About CAN Bus?

Why All The Fuss About CAN Bus?

The Internet of Things, the increasingly connected nature of all manner of embedded devices, continues to expand in scope. Cisco estimates that by 2020 more than 50 Billion “things” will be connected to the internet, the cloud and each other. We’ve talked about the potential impact of IoT technologies before, and the various ways access to the cloud is shaping hardware design and deployment. But there’s another aspect of system communication that’s just as important to the future of these increasingly complex technologies.

The way devices, sensors and systems communicate locally is as vital a consideration for hardware manufacturers, providers and integrators as the way information is processed in the cloud. While there are a slew of communication protocols and methods available to enable one system to “talk” directly with another, we’ve seen a growing interest in utilizing CAN bus communication for a wide range of industrial applications.

But why has CAN, which stands for Controller Area Network, suddenly become such an appealing IPC option? What are the inherent advantages of utilizing this particular communication method in embedded systems?

What is CAN Bus?

CAN bus is a message-based protocol allowing individual systems, devices and controllers within a network to communicate. In general, a bus is a communication system that transfers data between components. A Controller Area Network allows for data transfer in a system not otherwise connected to a network hosting device. For instance, Logic Supply has worked with clients to equip farming equipment like combines and other complex pieces of machinery with CAN-capable hardware, enabling the various equipment components to efficiently and effectively relay information to each other.

Following its introduction in the mid 1980’s, CAN bus communication has evolved well beyond the automotive industry where it was first widely adopted. Before CAN bus gained popularity, vehicle wiring harnesses could contain miles of wire, with bundles of 8 or more wires required to carry various signals to and from interconnected vehicle systems. In contrast, CAN bus utilizes a high-speed (25kbps – 1Mbps) twisted pair wiring system, greatly reducing the amount of wire necessary to allow system components to effectively communicate.

While CAN is still a widely-utilized option in modern in-vehicle computers, like Logic Supply’s RT100, CAN bus is now also being implemented in a wide range of embedded and industrial applications, from assembly lines and medical machinery, to building automation and access control installations.

What are the Benefits of CAN?

Integrated CAN bus communication offers a number of advantages for industrial PC users, including:

  • Speed – CAN data transfer speeds far outstrip traditional analog wiring harnesses since multiple messages can be sent simultaneously to all connected devices, sensors or actuators.
  • Flexibility – Because of its paired-down, single cable, two-wire structure, CAN bus offers enhanced installation and maintenance flexibility. CAN-connected systems not only contain significantly less wire, making them easier to install, but adding new components to a system requires far less development while also greatly reducing complications in diagnosing and addressing signal problems.
  • Reliability – In addition to being far less sensitive to magnetic interference than analog wiring, CAN communication also requires fewer cables and connectors, drastically cutting down on points of failure.
  • Cost – The lower hardware costs and minimal signal processing requirements make CAN an ideal solution for embedded applications requiring multi-processor communication on a budget.

How Is CAN Bus Used in Industrial Computing?

In an automated industrial installation, CAN bus is most commonly used as part of a distributed control system, connecting vital systems that may be spread throughout a facility. Generally a Human Machine Interface (HMI) allows the operator to interact with the system. From there programmable logic controllers (PLCs) relay those commands through the CAN bus interface to the sensors, actuators, motors or other mechanical systems that carry out the desired action.

CAN is often found in use on production lines in manufacturing environments, allowing operators and equipment to effectively communicate at each step of the assembly process. Building automation is another area where the speed, low cost and ease of installation have made CAN bus communication a popular choice to connect access control, security and environmental systems.

The Future of CAN Bus Communication

As the Internet of Things continues to grow and encompass more and more complex systems, standardizing the way each component communicates with the next will be vital in ensuring compatibility, expandability and installation longevity. Here at Logic Supply we’re working with clients to implement CAN bus communication in a wide range of custom embedded systems and we see a bright future for the technology, particularly in manufacturing environments and in modern building automation installations.

Leave a Comment

Your email address will not be published.