Intelligent 100 W DC-DC Converter with USB Interface

Intelligent DC-DC Converter with USB Interface

DCDC-USB
High power micro-controller DC-DC converter that accepts any input ranging from 6 to 34 volts and then provides varying outputs, depending on application. Can act as an Intelligent Automotive PSU for mainboards that have onboard power.

     

    £42.50 £51.43 incl. VAT
    In Stock

    Overview

    +
     
    The DCDC-USB is a high power buck-boost micro-controller DC-DC converter. It accepts any input ranging from 6–34 volts and the output can either be 12-volt regulated or changed with simple jumper settings to 5, 6, 9, 12, 13.5, 18 or 24 volts or via USB in fine increments (0.25 volts) anywhere from 5 to 24 volts. The DCDC-USB is excellent for powering a mainboard with single rail power from any voltage to any voltage and is great for use with laptops and custom electronics.

    Four modes of operation:

    • Dumb mode: Acts as a regular buck-boost DC-DC converter with wide input (6–34 volts) and produces a fixed 12-volt output (or any output from 5–24 volts)
    • Automotive mode: Acts as an intelligent power supply, ignition aware, and will send ON/OFF pulse to the mainboard to shut the system down or turn it on. Power consumption is less than 1 mA.
    • UPS mode: Acts as an intelligent UPS unit; it will shut down at prescribed battery voltages.
    • Script mode: Can be programmed to wake up, sleep-based on pre-programmed scripts.

    12 V output max current chart:

    12 V output max current chart

    DOWNLOADS

    Built and tested Industrial Computers

    Upgrade To A Full System

    Custom built to your specs and fully tested

     
    Try The System Finder 
    Computer Component Kits

    Buy With A Component Kit

    Find all the components you need right here at Logic Supply

     
    View Components 
     

    Technical Specs

    +
    SKU DCDC-USB
    Power Output 100 W
    Input Voltage 6~34 V
    Power Features Wide Input
    Automotive Intelligence
    Peripheral Power Out
    Operating Temperature Range -20°C ~ 65°C
    Dimensions (WxHxD) 135 x 37mm
    Regulatory Information RoHS
    Notes
    • At output power greater than 40 watts or if unit temperature exceeds 65°C, forced air ventilation will be required in order to prevent unit from excessive thermal stress for long period of times.