The Emphase FMH 4000x horizontal series flash module makes it convenient to configure solid state platforms in custom enclosures or in chassis with height restrictions. It can either plug directly into a standard 40-pin IDE port (female side of module) or be connected via a 40-pin IDE cable (male side of module) to act as a hard drive. Also, a dual-sided layout featuring male and female connectors allows multiple IDE devices to be attached, freeing your platform from previous restrictions when using a standard IDE direct-plug flash module.

With no moving parts, wide temperature range, and R/W endurance of 2,000,000 times, the FMH 4000X increases the range of environments and climate conditions your system can withstand. The wear-leveling algorithm extends the module's lifetime and performance by evenly spreading the media usage across all pages in the flash. Also, the FMH40I supports most operating systems, including Windows XPe and Linux.

The FMH 4000X is available in 40-pin & 44-pin versions of the following types:
A – Female Type, IDE notch faces away from module
B – Female Type, IDE notch faces over the module
C – Male Type, IDE notch faces away from module
D – Male Type, IDE notch faces over the module
E – Female/Male Type, IDE notch faces away from module
F – Female/Male Type, IDE notch faces over the module

Note: The FMH 4000X can plug directly into an IDE port or it can connect to a standard 40-pin IDE cable via pin headers. Because the IDE port location and layout varies from each mainboard, be sure to confirm component compatibility. Also available in 44-pin versions.

FMH 4000X Specifications
Interface	40-pin IDE ATA
Capacity	256MB to 4GB
IDE Transfer Mode	Ultra DMA 0–4 PIO mode 0–6 Multiword DMA 0–2
Data Transfer Rate	Read 24 MB/sec.; Write 8 MB/sec. (single channel) Read 40 MB/sec.; Write 20 MB/sec. (dual channel)
Direct-Plug Compatible Mainboards (A- & E-series)	VIA EPIA CN AOpen i945G
Direct-Plug Compatible Mainboards (B- & F-Series)	VIA EPIA M* VIA EPIA ML* VIA EPIA MII* VIA EPIA SP* VIA EPIA EK* VIA EPIA EN* VIA EPIA EX* Jetway J7F2WE* MSI MS-7199* MSI MS-7265* MSI MS-9802 Intel D201GLY*
Power Supply	+3.3V/+5V
Power Consumption	150 mA
Power Mode Support	Auto standby and sleep mode
Power Cycling (unexpected)	>3,000 times
Error Detection & Correction	ECC unit integrated
Certification	CE, FCC
R/W Endurance	2,000,000 times
MTBF (meantime between failures)	>3,000,000 hr.
Vibration	30G maximum
Shock	10G/10ms maximum
Operating Temperature	-10°C ~ 70°C
Operating Humidity	10% ~ 95% non-condensing
Dimensions (w x h x d)	48 mm x 32.6 mm x 5.5 mm 1.9" x 1.3" x 0.2"

*When connected, the flash module faces away from the mainboard and requires at least 3/4" clearance in front for proper installation in most Mini-ITX enclosures.

For more information, please see this product's webpage.