The Emphase FMH40I horizontal series flash module makes it convenient to configure solid state platforms in custom enclosures or in chassis with height restrictions. It can either plug directly into a standard 40-pin IDE port (female side of module) or be connected via a 40-pin IDE cable (male side of module) to act as a hard drive. Also, a dual-sided layout featuring male and female connectors allows multiple IDE devices to be attached, freeing your platform from previous restrictions when using a standard IDE direct-plug flash module.

With no moving parts, wide temperature range, and R/W endurance of 4,000,000 times, the FMH40I increases the range of environments and climate conditions your system can withstand. The wear-leveling algorithm extends the module's lifetime and performance by evenly spreading the media usage across all pages in the flash. Also, the FMH40I supports most operating systems, including Windows XPe and Linux.

Note: The FMH40I F-series can plug directly into an IDE port (IDE notch faces toward flash module) or it can connect to a standard 40-pin IDE cable via pin headers. Because the IDE port location and layout varies from each mainboard, be sure to confirm component compatibility. Also available in 44-pin versions.

FMH40I2G-F Specifications
Interface	40-pin IDE ATA
Capacity	2048MB (2GB)
IDE Transfer Mode	Ultra DMA mode 0-2
Data Transfer Rate	Read 10 MB/sec; Write 6 MB/sec
Direct-Plug Compatible Mainboards	VIA EPIA M* VIA EPIA ML* VIA EPIA MII* VIA EPIA SP* VIA EPIA EK* VIA EPIA EN* VIA EPIA EX* Jetway J7F2WE* MSI MS-7199* MSI MS-7265* MSI MS-9802 Intel D201GLY*
Power Supply	+3.3V/+5V
Power Consumption	15 mA
Power Mode Support	Auto standby and sleep mode
Power Cycling (unexpected)	>3,000 times
Error Detection & Correction	ECC unit integrated
Certification	CE, FCC
R/W Endurance	4,000,000 times
MTBF (meantime between failures)	>3,000,000 hr.
Vibration	30G maximum
Shock	1,500G maximum
Operating Temperature	-10 ~ 70°C
Operating Humidity	10% ~ 95% non-condensing
Dimensions (w x h x d)	48 mm x 32.6 mm x 5.5 mm 1.9" x 1.3" x 0.2"

*When connected, the flash module faces away from the mainboard and requires at least 3/4" clearance in front for proper installation in most Mini-ITX enclosures.

For more information, please see this product's webpage.