This CompactFlash (CF) to IDE converter is specifically designed for the Casetronic Travla C137 and C158 cases.

Specifications

• Fully IDE compatible
• Supports 40-pin 2.54mm IDE connector
• On-board 5V to 3.3V regulator
• Master/Slave select jumper
• Access LED indicator
• Board size: 78mm x 62mm (3.07" x 2.44")

Jumpers and Connectors

1. Master/Slave Select (JP2) – No jumper installed = Master, jumper installed = slave.
2. LED4 will flash when the Compact Flash is being accessed.
3. J1 can be used to connect to an external LED.
4. Power Connector (CN1) – Power is required on connector CN1.

Power Connectors

Pin 1: Not Used
Pin 2: Ground
Pin 3: Ground
Pin 4: +5V

Note: This CF reader is not hot-swappable since it is an IDE device. A CF card must be installed in the CF reader before the computer is booted up. If a CF card is inserted in the CF reader after the computer is started, the computer will not recognize the CF card and the computer will need to be restarted.

This CF adapter does not support DMA mode.