This CompactFlash (CF) to IDE converter is specifically designed for the Casetronic C146, C147, C159, and C299 cases.

Specifications:

• Fully IDE compatible
• Supports 40-pin 2.54mm IDE connector
• Supports 44-pin 2.0mm IDE connector
• Onboard 5 V to 3.3 V regulator
• Master/Slave select jumper
• Access LED indicator
• Board size: 78 x 62 mm (3.07" x 2.44")

Jumpers and Connectors:
1. Master/Slave Select (JP2) – No jumper installed = Master, jumper installed = slave
2. LED4 will flash when the CompactFlash is being accessed
3. J1 can be used to connect to an external LED
4. Power Connector (CN1) – Power is required on connector CN1

Power Connector:
Pin 1: Not Used
Pin 2: Ground
Pin 3: Ground
Pin 4: +5V

Note: This CF reader is not hot-swappable since it is an IDE device. A CF card must be installed in the CF reader before the computer is booted up. If a CF card is inserted in the CF reader after the computer is started, the computer will not recognize the CF card and the computer must be restarted.