This adapter allows you to replace hard disk drives with solid state storage in existing systems. This interface allows CompactFlash (CF) cards to be used in any system that includes a standard IDE 40-pin connector. Once the system starts with the adapter and the CF card attached, the system recognizes the CF card as a standard disk drive. Unlike other flash storage systems, such as disk-on-chip modules, this solution does not require drivers or additional software to run the unit. The CF card can be the primary boot device containing the OS and application. A cable (not supplied) between the system and the adapter board makes it possible to mount the adapter to a front panel bay.

Specifications:

• 40-pin (male) IDE connector
• This adapter comes with a floppy style power connector
• Dimensions: 50.8mm x 101.6mm (2" x 4")
• Supports CompactFlash cards (Type I & II) or an IBM Microdrive
• Transparent to the operating system, and does not require any drivers
• Same mounting hole locations as bottom holes of a 3.5" HDD

Note: This CF reader is not hot-swappable since it is an IDE device. A CF card must be installed in the CF reader before the computer is booted up. If a CF card is inserted in the CF reader after the computer is started, the computer will not recognize the CF card and the computer will need to be restarted.