The Relay cape is ideal to control devices such as lamps, motors, buzzers, bells, sirens, solenoids, sprinklers, garage doors and many other circuits. The high current relays can switch loads controlled by the BeagleBone. Four push-buttons or digital inputs provide signals to the BeagleBone. These inputs can be sensors, switches or external events to create an automated controller. Four additional digital outputs can drive signals to other devices such as LED, other relays, or digital devices. The output signal can be set to 5 or 3.3 volts to easily interface with external systems. Servo, DC and stepper motors can be interfaced for simple robotic applications. Finally analog voltage values can be measured such as a potentiometer or battery voltage (up to 18V).
Dual relay output allows control of two devices or provide DC motor direction control (forward, reverse). Quad PWM capable outputs can control 4 small DC motors or one unipolar stepper motor.
Analog (ADC) input allows monitoring battery voltage, and reading a potentiometer. Suitable for simple robotic and control applications, the relay cape can control an R/C servo motor.
Requires PW-5V2A ac-adapter.
- 2 high current relays (NO, COM, NC) with status LEDs
- 4 high current outputs (with status LEDs)
- 4 PWM outputs
- 4 Pushbutton switches
- 4 Input (5V tolerant, up to 12V)
- User LED (Blue) for status or debug
- Output voltage selection (3.3V or 5V)
- R/C servo motor output
- 2 Analog inputs (potentiometer and battery monitor)
- Screw terminal connectors (simplifies external connections)
- EEPROM Cape ID Selection
- Dimensions: 55 x 87 x 20mm (above P8,P9)
- Rohs compliant
NOTE: While the relay contacts are rated for 10 Amps / 240Vac, to avoid injury, this product should not operate beyond the design range of 8 Amps and 48V.
BEAGLEBONE BLACK TUTORIALS
For Tutorials, Resources, and Workshops, visit Inspire.logicsupply.com
WORKING ON A COMMERCIAL BEAGLEBONE PROJECT?
Contact a Sales Engineer to learn what fits together.
Chat With Us
|Operating Temperature Range
||0°C ~ 50°C
||55 x 87 x 13mm